欢迎光临河北金鼎泰泵业有限公司官网!
统一服务热线
13633380904
热门关键词: 渣浆泵,抽沙泵,压滤机入料泵
高级搜索:
联系我们Contact Us
统一服务热线:136-3338-0904

(7天*24小时)

手机:13633380904

传真:86 0312 3426161

邮箱:183005771@qq.com

地址:河北 保定市 安国水泵工业区

公司动态
您当前的位置:首页 » 新闻资讯 » 公司动态  » 渣浆泵的使用方法
渣浆泵的使用方法

来源: 时间:2020-09-18 09:52:36 次数:

抽沙泵,泥浆泵,渣浆泵在工作时,渣浆泵需要放在陆地上,吸水管放在水中,还需要灌泵启动。泥浆泵和液下渣浆泵由于受到结构的限制,工作时电机需要放在水面之上,泵放入水中,因此一定要固定,否则,电机掉到水中会导致电机报废。
抽沙泵,泥浆泵,渣浆泵在工作时,渣浆泵需要放在陆地上,吸水管放在水中,还需要灌泵启动。泥浆泵和液下渣浆泵由于受到结构的限制,工作时电机需要放在水面之上,泵放入水中,因此一定要固定,否则,电机掉到水中会导致电机报废。而且由于长轴长度一般固定,所以泵安装使用较麻烦,应用的场合受到很多的限制。 渣浆泵在处理杂质颗粒较多的浆料例如清除泥浆时,可以在进水口处放置一张过滤网,这样能够减少进入泵体的杂质颗粒,减小卡泵的几率,延长渣浆泵的使用寿命。渣浆泵的使用时间不宜过长,如果有备用泵,建议采取轮流作业的形式工作。 渣浆泵在工作过程中,应当将泵体放置在地面上,保持泵体的稳定。如果是泥浆泵或液下渣浆泵等需要水下工作的渣浆泵,则受限于其结构一定要将泵放置入水中,这时需将电机放置在水面上并进行固定,保持渣浆泵的稳定。 渣浆泵中有部分采用了机械密封,这类渣浆泵的使用,一定要保证轴封水的供应,并严禁无水状态下运行,避免因干磨而导致机械密封的烧毁。http://www.jdtpump.com

When the slurry pump is working, the slurry pump needs to be placed on the land, the suction pipe is placed in the water, and the pump needs to be started. Due to the structure limitation of mud pump and submerged slurry pump, the motor needs to be placed on the water surface when working, and the pump should be placed in the water, so it must be fixed, otherwise, the motor will be scrapped if the motor falls into the water. Moreover, because the length of the long shaft is generally fixed, the installation and use of the pump are troublesome, and the application occasions are limited. When the slurry pump is dealing with the slurry with more impurity particles, such as mud removal, a filter screen can be placed at the water inlet, which can reduce the impurity particles entering the pump body, reduce the probability of pump sticking, and prolong the service life of slurry pump. The service time of slurry pump should not be too long. If there is a standby pump, it is recommended to work in turn. Slurry pump in the process of work, the pump body should be placed on the ground to maintain the stability of the pump body. If it is a slurry pump or a slurry pump which needs to work underwater, it must be placed into the water due to its structure. At this time, the motor should be placed on the water surface and fixed to maintain the stability of the slurry pump. Mechanical seal is used in some slurry pumps. The use of this kind of slurry pump must ensure the supply of shaft seal water, and it is strictly prohibited to run without water to avoid the burning of mechanical seal due to dry grinding.